12VHPWR already obsolete

Associate
Joined
30 Jan 2003
Posts
1,514
Location
Cardiff

Replaced by 12V-2×6 in ATX 3.1​


CEM 5.1 specs are out. You won't need a new PSU if your PSU didn't use a 12+4 on PSU side. So Corsair are fine.


I wouldn't want to be holding a 4090 with a 12VHPWR right now assuming Nvidia will use the new socket..
 
Last edited:
Soldato
Joined
13 Jan 2004
Posts
20,962
You shouldn't need a new PSU if it's 12VHPWR on the psu side either as the 12V-2x6 is specific to the female connector GPU side and not the cable and in most cases will be backwards compatible.
 
Last edited:
Soldato
Joined
25 Mar 2004
Posts
15,823
Location
Fareham
Was also lucky enough to get the 4090FE after the shorter sense pin update.

Did originally buy a Seasonic 12VHPWR cable but then it turned out they were replacing it with a new standard so I returned it, just using the one that came with the card for now.

Seems OK though, not in a rush to update it.
 
Soldato
Joined
25 Mar 2004
Posts
15,823
Location
Fareham
If you bought after a certain date there is a good chance it's the newer sense pins as well, after or around my post above so March 2024.

This is for 4090 FE. Other manufacturers may differ.
 
Last edited:
Soldato
Joined
7 Jul 2004
Posts
7,790
Location
Gloucester
If you bought after a certain date there is a good chance it's the newer sense pins as well, after or around my post above so March 2024.

This is for 4090 FE. Other manufacturers may differ.

I bought my 4090FE at the end of July 23 and it has the shorter pins.
There were already reports of the FE with smaller pins before I ordered mine
 
Last edited:
Back
Top Bottom