Fans finally arrived this afternoon. Removing the 140s I'd put in the front of my case proved how stupid I am as in order to put them in front of a 360 rad I'd had to screw the fans from the inside and then fit the rad which of course meant to remove the fans meant removing the rad
All fans then out, discovered that the included screws in the box did not easily fit my EK rad. Included UNC screws should have fitted but although they are now in I suspect I have destroyed the threads on my rad. Oh well, I only used 4.
Fans are all connected to a Bitspower TouchAqua pwm fan and 5v ARGB controller.
On first boot, no RGB or power because I forgot to connect the TouchAqua to SATA power because I am a doofus.
Second boot, initially alarmed to see in the BIOS that my cpu was at 44c until I remembered my ambient is 40c. again with the doh!
All is working, and the fans are fine. No real difference in temps even though the fans are all on full force. Although you might think this would be loud, compared to the room fans I have running I can't really hear the D30s.
Lighting however is very cool. I just have them on blue because I also have a DRGB EK cpu block and reservoir which are limited in what I can make them do.